Products – Maxworth Minerals

Bentonite Specification

maxworth — Thu, 10 May 2018 12:40:10 +0000

MAXWORTH MINERALS INDIA PVT LTD MATERIAL TEST REPORT Bentonite Powder (Sodium Based) Super Ultrabond Grade
Sl. No	CHARACTERISTIC		RESULT OBTAINS SUPER ULTRA BOND GRADE	SPECIFIED AS PER IS 2911
01		Differencial free swell	30	28-30
02		Dencity in gm/cc	1.10	1.12 APPROX
03		ph	9.5	LESS THAN 11.5
04		LIQUID LIMIT OF BENTONITE	412	300-450%
05		LOSS ON DRYING AT 105C-BY WT	6%	8% MAX
06		SAND CONTENTS	1.20%	7.0% MAX
07		MARSH VISCOCITY	36 Seconds	30 to 60 SECONDS
08		GELFORMATION INDEX	45	25
09		SUSPENSION	100%	100%

Download Specification

The post Bentonite Specification appeared first on Maxworth Minerals.

A1 Ilmenite Specification

maxworth — Wed, 02 May 2018 13:17:05 +0000

A1 Ilmenite Specification

GRADE : #A1-IlM-T

PRODUCT – SPECIFICATION SHEET
Chemical Analysis
Parameters	Guaranteed (%)	Typical (%)
TiO₂	Min. 50	49 – 51 (97.5%ilm)
U+Th	Max. 80 ppm	40 – 80 ppm
ZrO₂	–	0.01 – 0.02
SiO₂	–	0.40 – 0.60
Al₂O₃	–	0.10 – 0.30
FeO	–	33 – 34
Cal Fe₂O₃	–	12 – 13.5
CaO	–	0.40 – 0.50
MgO	–	0.7 – 0.8
MnO	–	0.4 – 0.5
Cr₂O₃	–	0.05 – 0.07
Nb₂O₅	–	0.06 – 0.09
P₂O₅	–	0.03 – 0.04
V₂O₅	–	0.14 – 0.18
ZnO	–	0.07 – 0.09
As₂O₅	–	2 – 7 ppm
CeO₂	–	50 – 80 ppm
SO₃	–	0.01 -0.02
Sieve Analysis
Mesh (US)	Retention (%)	Cumulative retention (%)
40	0.07	0.07
60	3.54	3.61
80	17.7	21.31
100	23.55	44.86
140	43.59	88.45
200	8.44	96.89
-200	3.11	100

Note : Ilmenite is a natural product and as such slight variations in the chemical analysis and size distribution should be expected. Special contracts covering guarantees other than those specified can be negotiated.

Packaging

25 kgs. PE bags (max. 1000 kgs/ 1MT.)
1000 kgs. In 1MT Jumbo bags.

Download Specification

The post A1 Ilmenite Specification appeared first on Maxworth Minerals.

A1 Ilmenite Specification

maxworth — Wed, 25 Apr 2018 12:16:05 +0000

GRADE : #A1-IlM-V

PRODUCT – SPECIFICATION SHEET
Typical Chemical Analysis
Elements	Guaranteed (%)	Typical (%)
TiO₂	49.5 ~ 52	50.21
Fe₂O₃	6 ~ 10	8.33
FeO	35 ~ 39	37.88
Al₂O₃	1.0 Max	0.68
SiO₂	1.50 Max	1.29
Cr₂O₃	0.07 Max	0.06
V₂O₅	0.23 Max	0.20
P₂O₅	0.025 Max	0.02
U (ppm)	15 ppm Max	6 ppm
Th (ppm)	30 ppm Max	19 ppm
SO₃	0.03 Max	0.00
Mineralogical Report
Minerals	Guaranteed (%)	Typical (%)
Ilmenite	98.50 Min	98.90
Garnet	01.20 Max	0.90
Others	00.30 Max	00.30

Packaging

25 kgs. PE bags (max. 1000 kgs/ 1MT.)
1000 kgs. In 1MT Jumbo bags.

Download Specification

The post A1 Ilmenite Specification appeared first on Maxworth Minerals.

A1 Super Sillimanite Specification

maxworth — Tue, 20 Mar 2018 07:10:21 +0000

PRODUCT – SPECIFICATION SHEET

Chemical Analysis
Parameter	Guaranteed	Typical(%)
Al₂O₃	Min 58.0	58 – 59
SiO₂		36 – 37
Fe₂O₃	Max 0.65	0.45 – 0.65
TiO₂		0.2 – 0.5
CaO		0.1 – 0.2
MgO		0.05 – 0.1
LOI		0.5 – 0.7
Na₂O		0.25 – 0.5
K₂O		0.2 – 0.4

Sieve Analysis
Mesh (US)	Retention (%)	Cumulative Retention (%)
+200#	2% max	2

Note: Sillimanite is a natural product and as such slight variations in the chemical analysis are likely
negotiated. Distribution should be expected. Special contracts covering guarantees other than those specified can be

Download Specification

Chemical Analysis
Parameter	Guaranteed	Typical(%)
Al₂O₃	Min 57	57 – 58
SiO₂		37 – 38
Fe₂O₃		0.5 – 0.8
TiO₂		0.2 – 0.6
CaO		0.1 – 0.2
MgO		0.05 – 0.1
LOI		0.5 – 0.7
Na₂O		0.25 – 0.5
K₂O		0.2 – 0.4

Sieve Analysis
Mesh (US)	Retention (%)
+30#	Nil
+40#	0 – 0.5
+60#	2 – 4
+80#	30 – 35
+100#	35 – 40
+140#	22 – 26
+200#	1 – 6
-200#	0 – 1

Note: Sillimanite is a natural product and as such slight variations in the chemical analysis and size distribution should be expected. Special contracts covering guarantees other than those specified can be
negotiated. Distribution should be expected. Special contracts covering guarantees other than those specified can be

Download Specification

The post A1 Super Sillimanite Specification appeared first on Maxworth Minerals.

A1 Premium Sillimanite Specification

maxworth — Tue, 20 Mar 2018 07:08:40 +0000

PRODUCT – SPECIFICATION SHEET

Chemical Analysis
Parameter	Guaranteed	Typical(%)
Al₂O₃	Min 57.0	58.2
SiO₂		36.6
Fe₂O₃		0.62
TiO₂		0.2 – 0.4
CaO		0.1 – 0.2
MgO		0.05 – 0.1
LOI		0.5 – 0.7
Na₂O		0.25 – 0.5
K₂O		0.2 – 0.4

Sieve Analysis
Mesh (US)	Cumulative Retention (%)
200	0.96
300	18.9

Download Specification

The post A1 Premium Sillimanite Specification appeared first on Maxworth Minerals.

Olivine MSDS

maxworth — Tue, 20 Mar 2018 07:05:46 +0000

MATERIAL SAFETY DATA SHEET (MSDS)

I. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Manufacturer/Supplier:	MAXWORTH MINERAL TRADING PVT LTD Suite No- 48-14-116 / 6, Lakshmi Royal Plaza Fourth Floor, Resapuvanipalem, Visakhapatnam
Trade Names:	Rock garnet, Red River Garnet
Product/Chemical Name:	Garnet Abrasive Grains
Chemical Formula:	fe₃Al₂(SiO₂) with Mg & Mn in partial substitution for Fe in the formula
Other Designations:	Almandite, Pyrope and Spessartine Garnet
General Use:	Industrial; not limited to abrasives, non-skid components, water filtration

II. HAZARDOUS INGREDIENTS / IDENTITY INFORMATION

This material is a natural mixture of almandine garnet – fe₃Al₂(SiO₂) with Mg and Mn in partial substitution for Fe in the formula, and other trace minerals. The following substances are present and regulated by OSHA or ACGIH limits:

Substance	WT. %	ACGIH TLV	CAS NUMBER
		TWA
Nuisance Dust	N/A	15 mg/m³	N/A
Respirable Dust	N/A	5 mg/m³	N/A
Crystalline Silica	< 0.5%	0.10 mg/m³	N/A

III. PHYSICAL AND CHEMICAL PROPERTIES

Appearance	Reddish brown to pink grains	Avg. Bulk Density	2.4g/cm³ (150 lbs/ft³)
Particle Shape	Sub-rounded to angular	Specific Gravity	4.1 g/cm³ (H₂O = 1.0)
Odor	Not applicable	Melting Point	1,25^oC (2,282^oF)
Hardness		7.5 – 8.0 Mohs

IV. SECTION 4 – FIRE AND EXPLOSION HAZARD

Flash Point	Material is a non-flammable solid
Flash Point Method	Not applicable
Flammable Limits	Not applicable
LEL	Not applicable
UEL	Not applicable
Flammability Classification	Not applicable
Extinguishing Media	Use extinguishing media appropriate for the surrounding fire.
Special Fire Fighting Procedures	As appropriate to surrounding, fire fighters should be protected from nuisance dust.
Unusual Fire and Explosion Hazards	None

V. STABILITY AND REACTIVITY

Stability	Stable
Polymerization	Will not occur
Chemical Incompatibilities	None known
Hazardous Decomposition products	None known

VI. HEALTH HAZARD INFORMATION

Health Hazards (acute and chronic	None known. Use care to limit possible exposure to nuisance dust during blast cleaning.
Carcinogenicity	Crystalline silica (quartz) – contains less than 0.5%.
Inhalation	Dust may cause irritation of the nasal and respiratory tract.
Skin	May cause abrasions
Ingestion	None known; however, ingestion is not recommended.
Medical Conditions Generally Aggravated by Exposure	Chronic bronchitis, emphysema and other lung diseases may be aggravated by exposure to nuisance dust.
EMERGENCY FIRST AID PROCEDURES Inhalation	Remove to fresh air; administer oxygen if breathing is difficult.
Eye Contact	Wash eyes with water to flush out dust particles; obtain medical assistance if Needed.
Skin Contact	Wash affected area with soap and water.
Ingestion	Obtain first aid or medical assistance, if needed.

VII. PRECAUTIONS FOR SAFE HANDLING AND USE

SPILL / LEAK PROCEDURES

Spills	Sweep or vacuum material for disposal or recovery.
Disposal	Follow local, state and federal guidelines for disposal of inert solid waste. MATERIAL CONTAMINATED IN USE MAY REQUIRE SPECIAL HANDLING.
Handling / Storage Precautions	None – use good housekeeping practices to reduce dust; use approved hand, eye and respiratory protection when handling.
Other Precautions	Use materials only for the purposes intended, and incorporate methods of dust Control to maintain airborne dust within federal or local TLV limits.

VIII. CONTROL MEASURES

Ventilation	Sweep or vacuum material for disposal or recovery.
Respiratory Protection	Provide sufficient local exhaust or mechanical (general) ventilation to maintain dust exposure limit below threshold limit value (TLV).
Eye Protection	NIOSH/MSHA approved filters and air supplied hoods / helmets for blasters.
Protective Gloves	Leather or equivalent – in use.
Other Protective Clothing or Equipment	Normal safety protection is adopted.
Work / Hygienic Practices	Maintain a clean and safe work environment and monitor work practices.

TECHNICAL DATA & PHYSICAL CHARACTERISTICS FOR GARNET ABRASIVES

Average Chemical Composition (wt %)
SiO2 : 36%	TiO2 : 2%
Al2O3 : 23%	MnO : 2%
FeO : 27%	CaO : 2%
Fe2O3 : 2%	MgO : 6%

Recommended Blasting Conditions

Nozzle pressure	90+ psi
Material flow	400-600 lbs/hr
Nozzle size	6/8/10 MM or larger
Work distance	18-24 inches

Mineral Composition (Warranted Limit)

Garnet	+97.0%
Ilmenite	< 0.25%
Zircon	< 0.2%
Quartz	< 0.1%
Others	< 0.25%

Physical Characteristics

Bulk density	140 – 150 lbs/ft³
Specific gravity	4.1
Hardness (Mohs)	7.5 – 8.5
Melting point	1,250^oC
Particle shape	Sub-rounded to sub-angular

Other Characteristics

Conductivity	10-15ms/m (max 25 ms/m)
Radioactivity	Not detectable above background
Moisture Absorption	Non-hydroscopic
Free Iron	Less than 0.01%
Copper	Less than 0.01%
Other Heavy Metals	Less than 0.01%

Download MSDS

The post Olivine MSDS appeared first on Maxworth Minerals.

Micro Silica MSDS

maxworth — Tue, 20 Mar 2018 06:55:32 +0000

MATERIAL SAFETY DATA SHEET

Supplier’s Name: M/s. MAXWORTH MINERALS TRADING PVT. LTD.,

Address: D No. 48-14-116/6,
FOURTH FLOOR, LAKSHMI ROYAL PLAZA,
RESAPUVANIPALEM,
VISAKHAPATNAM – 530003, INDIA

Phone Number: 0091-891-2566263
E-Mail : enquiry@maxworthgroup.com.au
Web : www.maxworthgroup.com.au

SECTION 1 – Product Information

Trade Name:	NA
Chemical & Common Name(s):	MICROSILICA
Dot Class/ID Number:	Not regulated
Formula:	Trade secret

SECTION 2 – OSHA Potential Hazardous Ingredients

		Approximate %	Occupational Exposure Limits
Component	CAS#	By Weight	ACGIH-TLV	OSHA PEL	(Other)
Biogenic amorphous Silicon Di-Oxide	69012-64-2	92-94		10 mg/m^{3( resp )10 mg/m³ ( resp )}
Iron Oxide ( as Fe )	1309-37-1	2 to 5	5 mg/m^{3 ( resp )5 mg/m³ ( resp )}	10 mg/m^{3 ( Total )10 mg/m³ ( Total )}	NF
Silicon Carbide	409-21-2	2	3 mg/m^{3 ( resp )3 mg/m³ ( resp )}	5 mg/m3 ( resp )5 mg/m³ ( resp )	NF
Aluminium Oxide	1344-28-1	1 to 2	10 mg/m^{3 10 mg/m³}	5 mg/m^{3 ( resp )5 mg/m³ ( resp )}	NF
Calcium Oxide	1305-78-8	1 to 2	3.5 mg/m^{3 ( Total )3.5 mg/m³ ( Total )}	5 mg/m^{3 ( Total )5 mg/m³ ( Total )}	NF
Magnesium Oxide	1309-48-4	1 to 2	10 mg/m^{3 ( Total )10 mg/m³ ( Total )}	15 mg/m^{3 ( Total )15 mg/m³ ( Total )}	NF
Biogenic Crystalline Quartz Silicon Di-Oxide	14808-60-7	2	0.025 mg/m^{3 ( Total )0.025 mg/m³ ( Total )}	10 mg/m^{3 ( resp. )10 mg/m³ ( resp. )}	NF

SECTION 3 – HAZARDOUS IDENTIFICATION

Emergency Overview	A solid grey powder material that is not flammable & combustible at room temperature. This product is relatively non toxic & does not pose an immediate hazard to the health of emergency response personnel or to the environment in an emergency situation.
Potential Health Effects	Acute exposure to iron-oxide fume or dust can cause X-ray changes in the lungs as a result of long term exposure. Siderosis is a benign condition & is not associated with pulmonary fibrosis. Silicon Carbide dust may cause mild irritation of the upper respiratory tract on acute over-exposure. Chronic over-exposure to particulates of respirable size may cause lung inflammation, chest pain, difficult breathing, coughing & pneumoconiosis or possible fibrotic changes in the lungs. Prolonged over-exposure to respirable crystalline silica in excess of the TLV may cause Silicosis.
Potential Environmental Effects	The product has a high degree of intrinsic chemical stability & is relatively non toxic in the environment.

SECTION 4 – FIRST AID & MEASURES

Eye Contact	The product is a powder & may be a mechanical irritant in the eyes. Flush eyes with water until irritation is removed.
Skin Contact	Remove contaminated clothing & wash exposed areas with soap & water.
Inhalation	Use adequate respiratory protection remove victim from exposure area to fresh area. Medical Oxygen may be administered, if available, where breathing is difficult. If irritation persists or cough or symptoms develop, seek medical attention.
Ingestion	If swallowed, don’t induce vomiting. Consult a Physician, if necessary

SECTION 5 – FIRE AND EXPLOSION HAZARD DATA

Flash Point (method used)	NA	Flammable Limits	LEL NA	UEL NA
Extinguishing Media	NA	Special Fire Fighting Procedures		NA
Unusual Fire & Explosive Hazards (see reactivity section for other physical hazards)				NA

SECTION 6 – ACCIDENTAL RELEASE MEASURES

Procedure for Clean up	Ensure personal safety & control source of spillage. Clean up spilled material immediately, observing precautions in Section 8, Personal Protection & using methods that will minimize dust generation. Return uncontaminated spilled material to the process, if possible. Treat or dispose of waste material in accordance withall local, regional & national requirements.
Personal Precautions	Persons responding to an accidental release should wear protective clothes, gloves & a dust respirator.
Environmental Precautions	Care should be taken to prevent the spillage of this product to aquatic & terrestrial environments. Measures to control dust generation from product spills should be applied in dry dusty locations.

SECTION 7 – HANDLING & STORAGE

Procedure for Clean up

Material is to be stored in suitable containers. Handle & open the container with care in accordance with good storage & handling practices. Worn after handling always wash hands with soap & water.

SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION

Protective Clothing	Protective Clothing :- Gloves & coveralls or other work clothing are recommended to prevent prolonged or repeated direct skin contact. Appropriate eye protection should be where dust is generated.
Ventilation	Use adequate local or general ventilation to maintain the concentration of dust in the work environment well below the recommended occupational exposure limit.
Respirators	Where excessive dust is generated & cannot be controlled to within acceptable levels by engineering means, use appropriate NIOSH approved respiratory protection equipments for very fine particulates.

NA = NOT APPLICABLE

NF = NOT FOUND

SECTION 9 – PHYSICAL & CHEMICAL PROPERTIES

Appearance	Light Grey Powder
Vapour Pressure	Not Applicable
Specific Gravity	2.20 ( approx. )
Solubility in water	Negligible
Evaporation Rate	NA
Boiling Point	NA
Odour	None
Vapour Density	NA
pH	6.30
Freezing Point	NA

SECTION 10 – REACTIVITY DATA

Stability:	X	Stable	Conditions	None known
Stability:		Unstable	to avoid
Incompatibility (materials to avoid):	None Known
Hazardous Decomposition Products:	Avoid fumes from melting
Hazardous Polymerization:		May Occur	Conditions	None known
Hazardous Polymerization:	X	Will Not Occur	to avoid

SECTION 11 – TOXOLOGICAL INFORMATION

General	This material is relatively non toxic. Normal handling should not cause either acute or chronic health effects. where dust is generated.
Acute	Acute exposure to iron-oxide fume or dust can cause X-ray changes in the lungs as a result of long term exposure. Siderosis is a benign condition & is not associated with pulmonary fibrosis. Airborne respirable dust may cause irritation in lungs, nose & throat.
Skin	Components are not probably irritating to skin.
Eye	The product is a powder & may be a mechanical irritant in the eyes.
Inhalation	Silicon Carbide dust may cause mild irritation of the upper respiratory tract on acute over-exposure. Chronic over-expposure to particulates of respirable size may cause lung inflammation, chest pain, difficult breathing, coughing & pneumoconiosis or possible fibrotic changes in the lungs. Prolonged over-exposure to respirable crystalline silica in excess of the TLV may cause Silicosis.
Ingestion	Not established

SECTION 12 – ECOLOGICAL INFORMATION

The principal constituents of this product are chemically stable and, as such it will be relatively inert in the environment. Material should, however be kept in suitable containers & spilled material cleaned-up.

SECTION 13 – DISPOSAL CONSIDERATIONS

If material can not be returned to process or salvage dispose of in accordance with applicable regulations. Material may be disposed of in a sanitary landfill.

SECTION 14 – TRANSPORT INFORMATION

Proper Shipping Name	Not Regulated
US DOT Hazard Classification	Not applicable
US DOT Product Identification Number	Not applicable
IMO Classification	Not applicable
Transport Canada Classification	Not applicable
Transport Canada Product Identification Number	Not applicable
Marine Pollutant	Not applicable

SECTION 15 – REGULATORY INFORMATION

This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations & the MSDS contains all the information required by the Controlled Products Regulations.

U.S
Ingredients Listed on TSCA Inventory – Yes
Hazardousunder Hazard Communication Standard – Yes
CERCLA Section 103 Hazardous Substances – No.
SARA Section 302 Extremely Hazardous Substances – No ingredients apply
SARA Section 311/312 Hazard Categories – Chronic health
SARA Section 313 Toxic Release Inventory – No ingredients apply.

CANADIAN
Listed on the Domestic Substances List – Yes
Listed on the National Pollutants Release Inventory – No
WHMIS Classification – D-2A

SECTION 16 – OTHER INFORMATION

Notice to Readers :-

Application of Micro Silica to be used in making concrete in construction. All information, recommendations, and suggestions in this MSDS, concerning our products are based on tests and data believed to be reliable, it cannot be guaranteed. Since the actual use by others is beyond our control it is the user’s responsibility to determine the safety, toxicity and suitability for their own use of the product described herein.

Download MSDS

The post Micro Silica MSDS appeared first on Maxworth Minerals.

Micro Silica Specification

maxworth — Tue, 20 Mar 2018 06:52:43 +0000

Micro Silica Specification

View MSDS Details >>

MICRO SILICA
STANDARD	ASTM C-1240
SiO₂	90 – 92%
+45 Microns	5% Max
LOI	3% Max
Moisture	2.5% Max
SO₃	2% Max
MgO	5% Max
Alkali content (Na2O + 0.658 K2O)	1.5% Max
Chloride content	0.1% Max
Free CaO	1% Max
Free SiO2	0.4% Max
Density	500 – 600 Kg/m³

MICRO SILICA
STANDARD	BS 4550
SiO₂	90 – 92%
+45 Microns	3% Max
LOI	3% Max
Moisture	2.5% Max
SO₃	2% Max
MgO	5% Max
Alkali content (Na2O + 0.658 K2O)	1.5% Max
Chloride content	0.1% Max
Free CaO	1% Max
Free SiO2	0.4% Max
Density	500 – 600 Kg/m³

Sl No	Parameters	Results (%)	Actuals	Standards
1	SiO₂	92.68	88 – 93	ASTM C – 1240
2	LOI (at 750^OC)	3.01	4% Max	ASTM C – 1240
3	+45 Microns	2.90	5% Max	ASTM C – 1240
4	Al₂O₃	0.45	< 2%	ASTM C – 1240
5	Fe₂O₃	0.30	< 1%	ASTM C – 1240
6	SO₃	0.16	< 1%	ASTM C – 1240
7	MgO	0.42	< 1%	ASTM C – 1240
8	K2O	0.21	< 1%	ASTM C – 1240
9	Na2O	0.59	< 1%	ASTM C – 1240
10	pH Value		7.5% Max	ASTM C – 1240
11	Density	578	500 – 600 Kg/m³	ASTM C – 1240
12	Specific Surface Area (B.E.T)		> 16M²/gm
13	Pozzolanic Activity Index (7 Days)	109	105% Min
14	Pozzolanic Activity Index (28 Days)	119	117% Min

Download Specification

The post Micro Silica Specification appeared first on Maxworth Minerals.

A1 Ilmenite-M Specification

maxworth — Tue, 20 Mar 2018 06:47:51 +0000

A1 Ilmenite Specification

GRADE : #A1-IlM-M

Mineralogy	–	Typical (%)
Chemical Analysis
Parameters	–	Typical (%)
TiO₂	–	51-52
FeO₃	–	33.49
Fe₂O₃	–	11.92
SiO₂	–	0.81
Cr₂O₃	–	0.056
CaO	–	0.16
MgO	–	0.47
V₂O₅	–	0.06
Nb₂O₅	–	0.013
Al₂O₃	–	0.74
ZrO₂	–	0.025
Th	–	0.0013
U	–	: 1.0 ppm
Sieve Analysis
MM	Mesh	Weight %
0.417	40	Nil
0.297	50	15~30
0.249	60	25~40
0.178	80	40~55
0.125	120	0~0.5
	pan	0~0.5
Mineral Composition
Ilmenite	–	95-98%
Rutile	–	0.5-1%
Zircon	–	0.5-1%
Quartz	–	< 0.5%

Note : Variation in the size of grains occurs from time to time. Although not guaranteed. The grain size distribution can be expected to be within the above value.

Download Specification

The post A1 Ilmenite-M Specification appeared first on Maxworth Minerals.

Fly Ash (Class F) MSDS

maxworth — Tue, 20 Mar 2018 06:44:53 +0000

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

SUPPLIER NAME : M/s. MAXWORTH MINRALS TRADING PVT. LTD.,

ADDRESS : D No. 48-14-116/6,
4TH FLOOR, LAKSHMI ROYAL PLAZA,
RESAPUVANIPALEM,
VISKAHAPATNAM: 530003, AP, INDIA

Telephone Number : (91) 891 256 6263
E-MAIL : enquiry@maxworthgroup.com.au
Web : www.maxworthgroup.com.au

MSDS DATE: 05.01.2018

SYNONYMS : FGA, FINE GRADE ASH, FLY ASH
USES : ASPHALT ADDITIVE, CEMENT ADDITIVE, CONCRETE ADDITIVE, CONSTRUCTION FILLER, INDUSTRIAL APPLICATIONS, RAW MATERIAL, SOIL STABILIZATION.

2. HAZARDOUS IDENTIFICATION : CLASSIFIED AS NON HAZARDOUS ACCORDING TO ASCC CRITERIA

RISK PHRASES :

R20 : HARMFUL BY INHALATION.
R36/37/38 : IRRITATING TO EYES, RESPIRATORY SYSTEM AND SKIN
R40 : LIMITED EVIDENCE OF CARCINOGENIC EFFECT
R48/20 : HARMFUL DANGER OF SERIOUS DAMAGE TO HEALTH BY PROLONGED THROUGH INHALATION.

SAFETY PHRASES :

S22 : DO NOT BREATH DUST
S24/25 : AVOID CONTACT WITH SKIN AND EYES
S36/37/39 : WEAR SUIATBLE PROTECTIVE CLOTHING, GLOVES AND EYE/FACE PROTECTION.
S38 : IN CASE OF INSUFFICIENT VENTILLATION, EAR SUIATBLE RESPIRATORY EQUIPMENT
S51 : USE ONLY IN WELL VENTILATED AREAS

NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE

UN NO. : NONE ALLOCATED
PACKING GROUP : NONE ALLOCATED
DG CLASS : NONE ALLOCATED
HAZCHEM CODE : NONE ALLOCATED
SUBSIDIARY RISKS(S) : NONE ALLOCATED
EPG : NONE ALLOCATED

3. COMPOSITION / INFORMATION ON INGREDIENTS :

Ingredient	Formula	CAS No.	Content
QUARTZ (SILICA CRYSTALLINE)	Si-O₂	14808-60-7	60-70%
CALCIUM OXIDE	Ca-O	1305-78-8	<12%
IRON OXIDE	Fe₂-O₃	1309-37-1	<4%
ALUMINIUM OXIDE	AL₂-O₃	1344-28-1	10-20%
MAGNESIUM OXIDE	MG-0	1309-48-4	<1%

4. FIRST AID MEASURES :

Eye	If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a poisons information centre, a doctor, or for at least 15 minutes.
Inhalation	If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.
Skin	If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue flushing with water until advised to stop by a poisons information centre or a doctor.
Ingestion	For advice, contact a poisons information centre on 13 11 26 (Australia Wide) or a doctor (at once). If swallowed, do not induce vomiting.
Advice to Doctor	Treat symptomatically

5. FIREFIGHTING MEASURES :

Flammability	Non Flammable. May evolve toxic gases if strongly heated.
Fire and explosion	No fire or explosion hazard exists.
Extinguishing	Prevent contamination of drains or waterways.
Hazchem code	None allocated

6. ACCIDENTAL RELEASE MEASURES :

Spillage

Contact emergency services if required. Use personal protective equipment. Clear areas of all unprotected personnel. Ventilate area where possible. Contain spillage, then cover / absorb spill with non-combustible absorbent material (vermiculite, sand, or similar), collect and place in suitable containers for disposal. Avoid generating dust.

7. STORAGE AND HANDLING :

Storage	Store tightly sealed in a cool, dry, well ventilated area, removed from acids, alkalis, heat or ignition sources and food stuffs. Ensure containers are adequately labeled, protected from physical damage and sealed when not in use. Check regularly for leaks or spills.
Handling	Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION :

Exposure Stds	Ingredient	Reference	TWA		STEL
			ppm	Mg M3	ppm	Mg M3
	Silica, Crystalline Quartz	ASCC (AUS)	–	0.1	–	–
Biological limits	No biological limit allocated
Engineering Controls	Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is recommended. Maintain dust levels below the recommended exposure standard.
PPE	Wear dust-proof goggles and rubber or PVC gloves. When using large quantities or where heavy contamination is likely, wear: coveralls. At high dust levels, wear: a Full-face class P3 (Particulate) or an Air-line respirator. Where an inhalation risk exists, wear: a class P1 (Particulate) respirator.

9. PHYSICAL & CHEMICAL PROPERTIES

Appearance	GRAY POWDER	Solubility (water)	< 50 g/L
Odour	ODOURLESS	Specific Gravity	2.15 to 2.25
Ph	3 to 4	% Volatiles	< 2%
Vapour Pressure	Not available	Flammability	Non Flammable
Vapour Density	Not available	Flash point	Not relevant
Boiling Point	Not available	Upper explosion limit	Not relevant
Melting Point	>1600 ^oC	Lower explosion limit	Not relevant
Evaporation Rate	Not available
Bulk density	800-1000 Kg/m³

10. STABILITY & REACTIVITY

Chemical stability	Stable under recommended conditions of storage
Conditions to avoid	Avoid contact with incompatible substances.
Material to avoid	Incompatible with acids (e.g. nitric acid) and alkalis (e.g. hydroxides)
Decomposition	May evolve toxic gases if heated to decomposition.
Hazardous reactions	Polymerization is not expected to occur.

11. TOXICOLOGICAL INFORMATION

Health hazard summary	Irritant. Use safe work practices to avoid eye or skin contact and inhalation. Chronic exposure to crystalline silica may result in lung fibrosis (silicosis). However, due to the low levels of crystalline silica, chronic health effects are not anticipated with normal use. Crystalline silica is classified as carcinogenic to humans (IARC Group 1)
Eye	Irritant. Contact may result in irritation, lacrimation, pain, redness and conjunctivitis. May result in burns with prolonged contact.
Inhalation	High Chronic toxicity – irritant. Over exposure to dust may result in mucous membrane irritation of the respiratory tract. Chronic exposure to crystalline silica may result in silicosis (lung fibrosis). Crystalline silica is classified as carcinogenic to humans (IARC Group 1).
Skin	Irritant. Contact may result in irritation, redness, pain and rash. May cause sensitization by skin contact
Ingestion	Low to moderate toxicity. Ingestion may result in gastrointestinal irritation, nausea, vomiting, abdominal pain and diarrhoea.
Toxicity data	Quartz (Silica Crystalline) (14808-60-7) LCLo (Inhalation) : 300 ug/m³/10 years (human) LDLo (Intravenous) : 200 mg/kg (rat) LDLo (Intravenous) : 20 mg/kg (dog) TCLo (Inhalation) : 16 000 000 particles / ft3/8 hours/17.9 years (human-fibrosis)

12. ECOLOGICAL INFORMATION

Environment

The main component/s of this product are not anticipated to cause any adverse effects to plants or animals.

13. DISPOSAL CONSIDERATION

Waste disposal	Ensure product is covered with moist soil to prevent dust generation and dispose to approved council landfill. Contact the manufacturer if additional information is required.
Legislation	Dispose of in accordance with relevant local legislation

14. TRANSPORT INFORAMATION

NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE
Shipping Name : None allocated
UN No. None allocated	DG Class : None allocated	Subsidiary Risk(s): None allocated
Packing group : None allocated	Hazchem group : None allocated	EPG : None allocated

15. REGULATORY INFORMATIONS

Poison Schedule	A poison schedule number has not been allocated to this product using the criteria in the standard for the uniform scheduling of drugs and poisons (SUSDP)
AICS	All chemicals listed on the Australian Inventory of Chemical substances (AICS)

16. OTHER INFORMATION

Additional Information	Crystalline silica is present in Fly Ash as an impurity. The amount depends on the crystalline silica content of the source coal. ALUMINO SILICATES: When alumina silicates have been exposed to service temperatures exceeding 982^o C for prolonged periods, cristobalite, a form of crystalline silica may be formed. Exposure to cristobalite dust may cause pulmonary fibrosis-silicosis. A hazard is only anticipated during demolition of used refractory materials. Cristobalite is classified as carcinogenic to humans (IARC Group 1). RESPIRATORS: In general the use of respirators should be limited and engineering controls employed to avoid exposure. If respiratory equipment must be worn ensure correct respirator selection and training is undertaken. Remember that some respirators may be extremely uncomfortable when used for long periods. The use of air supplied respirators should be considered where prolonged or repeated use is necessary. ABBREVIATIONS: ADB – Air Dry basis BEI-Biological exposure indices(s) CAS# – Chemical abstract service number-used to uniquely indentify chemical compounds CNS – Central Nervous System EINECS – European inventory of existing commercial chemical substances IARCS – International agency for research on cancer M – moles per ltr, a unit of concentration. Mg/m³ – Milligrams per cubic mtr NOS – Not otherwise specified NTP – National toxicology program OSHA – Occupational safety fir health administration pH – relates to hydrogen ion concentration using a scale of 0(high acidic) to 14 (highly alkaline) ppm – Parts per million RTECS – registry of toxic effects of chemical substances TWA/ES -Time weighted average or exposure standard. HEALTH EFFECTS FROM EXPOSURE : It should be noted that the effects from exposure to this product will depend on several factors including: frequency and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of application. Given that it is impractical to prepare a Chem Alert report which would encompass all possible scenarious, it is anticipated that users will assess the risks and apply control methods where appropriate. PERSONAL PROTECTIVE EQUIPMENT GUIDELINES : The recommendation for protective equipment contained within this Chem Alert is provided as a guide only. Factors such as methods of application, working environment, quantity used, product concentration and the availability of engineering controls should be considered before final selection of personal protective equipment is made.
Report Status:	This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the manufacturers safety data sheet (‘SDS’). It is based on information concerning the product which has been provided to RMT by the manufacturer or obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of the product should be obtained directly from the manufacturer. While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does not provide any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss, injury, or damage (including consequential loss) which may be suffered or incurred by any person as a consequence of their reliance on the information contained in this SDS.
Prepared by	M/S. MAXWORTH MINERALS TRADING PVT. LTD., D No 48-14-116/6, LAKSHIMI ROYAL PLAZA, FOURTH FLOOR, RESAPUVANIPALEM, VISAKHAPATNAM – 530003, INDIA TEL : (91) 891 256 6263

Download MSDS

The post Fly Ash (Class F) MSDS appeared first on Maxworth Minerals.

Products – Maxworth Minerals

Bentonite Specification

MAXWORTH MINERALS INDIA PVT LTD

MATERIAL TEST REPORT

Bentonite Powder (Sodium Based)

Super Ultrabond Grade

A1 Ilmenite Specification

A1 Ilmenite Specification

Packaging

A1 Ilmenite Specification

Packaging

A1 Super Sillimanite Specification

PRODUCT – SPECIFICATION SHEET

A1 Premium Sillimanite Specification

PRODUCT – SPECIFICATION SHEET

Olivine MSDS

MATERIAL SAFETY DATA SHEET (MSDS)

I. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

II. HAZARDOUS INGREDIENTS / IDENTITY INFORMATION

III. PHYSICAL AND CHEMICAL PROPERTIES

IV. SECTION 4 – FIRE AND EXPLOSION HAZARD

V. STABILITY AND REACTIVITY

VI. HEALTH HAZARD INFORMATION

VII. PRECAUTIONS FOR SAFE HANDLING AND USE

SPILL / LEAK PROCEDURES

VIII. CONTROL MEASURES

TECHNICAL DATA & PHYSICAL CHARACTERISTICS FOR GARNET ABRASIVES

Recommended Blasting Conditions

Mineral Composition (Warranted Limit)

Physical Characteristics

Other Characteristics

Micro Silica MSDS

MATERIAL SAFETY DATA SHEET

SECTION 1 – Product Information

SECTION 2 – OSHA Potential Hazardous Ingredients

SECTION 3 – HAZARDOUS IDENTIFICATION

SECTION 4 – FIRST AID & MEASURES

SECTION 5 – FIRE AND EXPLOSION HAZARD DATA

SECTION 6 – ACCIDENTAL RELEASE MEASURES

SECTION 7 – HANDLING & STORAGE

SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION

SECTION 9 – PHYSICAL & CHEMICAL PROPERTIES

SECTION 10 – REACTIVITY DATA

SECTION 11 – TOXOLOGICAL INFORMATION

SECTION 12 – ECOLOGICAL INFORMATION

SECTION 13 – DISPOSAL CONSIDERATIONS

SECTION 14 – TRANSPORT INFORMATION

SECTION 15 – REGULATORY INFORMATION

SECTION 16 – OTHER INFORMATION

Micro Silica Specification

Micro Silica Specification

A1 Ilmenite-M Specification

A1 Ilmenite Specification

Fly Ash (Class F) MSDS

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

2. HAZARDOUS IDENTIFICATION : CLASSIFIED AS NON HAZARDOUS ACCORDING TO ASCC CRITERIA

3. COMPOSITION / INFORMATION ON INGREDIENTS :

4. FIRST AID MEASURES :

5. FIREFIGHTING MEASURES :

6. ACCIDENTAL RELEASE MEASURES :

7. STORAGE AND HANDLING :

8. EXPOSURE CONTROLS / PERSONAL PROTECTION :

9. PHYSICAL & CHEMICAL PROPERTIES

10. STABILITY & REACTIVITY

11. TOXICOLOGICAL INFORMATION

12. ECOLOGICAL INFORMATION

13. DISPOSAL CONSIDERATION

14. TRANSPORT INFORAMATION

15. REGULATORY INFORMATIONS

16. OTHER INFORMATION